Designed as horse feeders or cattle feeders
Easy load design
No tractor necessary to load round bale into the round bale feeder.
Open top prevents horses from rubbing off mane
Round bale feeder comes in 5 parts that bolt together
Bale cradle is 36" high, 73" long, 52" wide
Square tubing on frame is 1"x1" and the round inner bars are 1" round
***This bale cradle is designed to hold round bales that are 4' wide by 4' 5' or 6' tall. It will not hold a 5' wide bale!
R1000 Round Bale Feeder
Height - 42" cattle and horse feeder Diameter - 7.5' round bale feeder Skirt - 14"/16-gauge steel Ends - 1.5" x 1.5" angle iron Sections per feeder - 3 Bolts - 3/16" carriage head w/ nuts Tubing - 1" square
R2000 Round Bale Feeder
Height - 42" cattle and horse feeder Diameter - 7.5' round bale feeder Ends - 1.5" x 1.5" angle iron V-Leg Sections - 3 Braces - 3/4" Square Bolts - 3/16" carriage head w/ nuts Tubing - 1" square
R3000 Round Bale Feeder
Height - 42" cattle and horse feeder Diameter - 7.5' round bale feeder Ends - 1.5" x 1.5" angle iron Sections per feeder - 3 Bolts - 3/16" carriage head w/ nuts Braces - 3/4" spuare tubing Tubing - 1" square
`
R4000 Round Bale Feeder
Height - 42" cattle and horse feeder Diameter - 7.5' round bale feeder Skirt - 14"-gauge steel Ends - 1.5" x 1.5" angle iron Sections per feeder - 3 Bolts - 3/16" carriage head w/ nuts Tubing - 1 1/2" square
RBFH-101
Designed as horse feeders or cattle feeders.
Open top prevents horses from rubbing off mane
Round bale feeders have three sections and three skids.
Horse feeder is 32" tall, 8' diameter
Each section, of the round bale feeders, are composed of 1" 16—gauge square tubing and 18–gauge sheet metal.
Hanging Fence Horse Feeder
Base: Horse feeder with 16-gauge sheet steel construction Height: 36" Width: 24" Depth: 12" Tubing: 3/4"
BF004H Feeder
Horse feeder with 6-gauge sheet steel construction Frame and skids: 1-5/8” round tubing Tops: 32” wide Bottoms: 28” wide Depth: 10” cattle feeder: 22” tall horse feeder: 36” tall
Hay Rack Description
Height: 31” Width: 35” Frame: 1” square tubing Base: 1.5” x 1.5” x 1/8” angle iron Slant Bars: 3/4” round tubing
PBF1010 Feeder
Available in 5’ or 10’ lengths 10” deep for large feed capacity Rounded corners for better clean out UV stabilized to prevent sun damage
Completely corrosion resistant
One 1-5/8” brace on 5’ model
Three 1-5/8” braces on 10’ model
BF112C Feeder
Available in horse or cow heights
Available in 4’, 8’, or 12’ lengths 16-gauge sheet steel construction Frame and skids: 1-5/8” round tubing Tops: 32” wide Bottoms: 28” wide Depth: 10”
